Materials and technologies

Shower Zone (Wellness Area)

The shower zone is a functional part of the wellness area intended for rinsing the body before and after sauna use or bathing in a hot tub. For hygiene and operational reasons, it is separated from the sauna and hot tub by its own floor covering and drainage, capable of withstanding permanent contact with water. The shower zone floor is graded towards a floor drain so that water does not stand on the surface. The walls and floor use materials with high moisture resistance, for example PVC flooring, tiles or composite boards. In outdoor wellness setups, the shower zone is often designed as a separate shelter or part of a technical room.


Advantages of the shower zone

  • Separated hygiene function: A dedicated shower zone reduces the transfer of dirt and cosmetics into the hot tub water or the sauna interior.
  • Graded floor with a drain: Controlled water run-off prevents it from pooling on the surface and reduces the risk of slipping.
  • Materials resistant to permanent moisture: The surfaces withstand continuous contact with water without degrading throughout the zone’s service life.
  • Practical placement within the usage cycle: Proximity to the sauna and hot tub shortens the route between the individual phases of the wellness routine.

Frequently Asked Questions

It is not mandatory, but it is recommended for hygiene reasons, particularly where the hot tub is shared by several people.

A slope of approximately 1 to 2% towards the drain is commonly used, ensuring reliable water run-off without a noticeable unevenness in the floor.

Yes, when frost-resistant and UV-resistant materials are used, together with proper drainage and, where applicable, shelter from a pergola.

Yes, usually through a flow heater or a connection to an existing hot water supply in the building.

Water-resistant tiles, composite boards, or treated timber with a protective coating, depending on the overall design of the setup.

Indirectly, yes, since rinsing before entry reduces the amount of cosmetics and dirt in the water, which lowers the load on the filtration system.
Where to find it
Online configurator

Modular system
Precise configuration

Each model is based on a structurally proven foundation.
Configuration takes place within defined variants that maintain stability, safety and material integrity.

The result is a solution that naturally fits into the space and supports long-term regeneration.
50 000+
combinations