Materials and technologies

Ventilation (Sauna and Wellness Cabins)

Ventilation is a system of controlled air exchange in a sauna or wellness cabin that supplies fresh air and removes moisture and heat once use has finished. In a Finnish sauna, air flows from the inlet vent near the heater towards the outlet vent on the opposite side of the cabin, creating even airflow without cold spots at floor level. A correctly sized outlet vent allows the air in the cabin to be exchanged several times per hour. Ventilation also reduces the risk of moisture condensation in the wooden structure between sauna sessions. In outdoor cabins, the ventilation openings are combined with protective grilles against insects and rodents.


Advantages of controlled ventilation

  • Even temperature distribution in the cabin: Controlled airflow eliminates significant temperature differences between the floor and the top bench.
  • Protection of the wooden structure: Removing moisture after sauna use reduces the risk of long-term dampness in the cladding and structural elements.
  • Fresh air supply during use: The system ensures sufficient air exchange even during longer sauna sessions.
  • Low maintenance requirements: Passive ventilation openings with no moving parts require only occasional checks to confirm they remain clear.

Frequently Asked Questions

The inlet vent is usually at floor level near the heater, and the outlet vent is positioned higher on the opposite side of the cabin, which ensures even airflow.

Passive ventilation through openings is sufficient for most home saunas. Electric fans are used in larger or commercial installations.

With correctly sized openings, exchanging the air volume several times per hour during use is recommended.

Slightly, yes, since some of the heated air leaves through the outlet vent. This effect is accounted for when sizing the heater output.

Yes, opening the door and ventilation openings after the last session speeds up drying of the structure and extends its service life.

Yes, infrared cabins have lower air exchange requirements, since they do not operate with the high humidity produced by pouring water on the stones in a Finnish sauna.
Where to find it
Online configurator

Modular system
Precise configuration

Each model is based on a structurally proven foundation.
Configuration takes place within defined variants that maintain stability, safety and material integrity.

The result is a solution that naturally fits into the space and supports long-term regeneration.
50 000+
combinations