Skip to content
Materials and technologies

Infrared Radiator (Full-Spectrum and Carbon)

An infrared radiator is the heat source of an infrared sauna. Unlike a sauna heater, it does not heat the air first; it emits infrared radiation that warms the surface of the body directly. The air in the cabin therefore stays cooler than in a Finnish sauna, and the cabin needs no stones or water. Two main types are used in infrared saunas: full-spectrum radiators, which emit across a wider range of wavelengths and act in a focused way, and carbon panels with a large surface and lower surface temperature, which spread heat more evenly. Radiator output is stated in watts. Infrared heaters for saunas are placed so that the heat reaches the back, sides and calves; in our infrared saunas individual radiators and panels range from 75 to 500 W.


Advantages of infrared radiators

  • Direct body heating: Heat reaches the body without first having to warm the whole volume of air.
  • Lower air temperature: The cabin works at a lower air temperature than a Finnish sauna.
  • No stones or water: No heater, stones or water are needed; you simply switch the cabin on.
  • Placed around the body: Radiators and panels are positioned at the back, sides, calves and floor.

Frequently Asked Questions

A full-spectrum radiator emits across a wider range of wavelengths and acts in a focused way, for example on the back. A carbon panel has a large surface and a lower surface temperature, so it spreads heat evenly over a larger area.

It depends on the model. In our infrared saunas the temperature is set roughly between 25 and 70 °C.

The infrared saunas we offer run on 230 V and need neither a three-phase connection nor a water supply. Some models require a dedicated socket.

For our models, the total cabin rating is roughly 1.3 to 2.1 kW, depending on size and number of radiators.

No. An infrared sauna has no stones, and the radiators are not designed for contact with water. The cabin is cleaned without spraying water.
Where to find it
Online configurator

Modular system
Precise configuration

Each model is based on a structurally proven foundation.
Configuration takes place within defined variants that maintain stability, safety and material integrity.

The result is a solution that naturally fits into the space and supports long-term regeneration.
50 000+
combinations