Solis Pane Duo
Infrared sauna for 2 people with a footprint of 130 × 104 cm. Two dimmable 400 W infrared radiators and four heating panels for the sides, calves and floor, total output 1,800 W at 230 V. Temperature 30–70 °C, reading and coloured light, radio, Bluetooth, USB and AUX.
3 475 € incl. VAT2 825 € excl. VAT
Extended service
reliability and peace of mind for years
Direct infrared heat
warms the body while the cabin air stays cooler
Fast delivery
your infrared sauna ready in 4 to 8 weeks from payment of the order
No heater or stones
just an electrical connection, no water or chimney
A two-person infrared sauna that heats from back to feet
Solis Pane Duo is a two-person infrared sauna for indoor use. External dimensions of 130 × 104 × 200 cm (W × D × H) and a bench length of 121 cm allow two people to sit side by side.
The cabin plugs into a 230 V socket. A total output of 1,800 W requires neither a three-phase connection nor a water supply.
Construction and materials
The cabin shell is made of abachi wood, the interior is lined with aspen and the bench is abachi. Abachi has low thermal conductivity and contains no resin, so the bench does not burn on direct skin contact, even at operating temperature.
The glass front measures 100 × 200 cm. Walls, ceiling and floor are supplied as finished panels that are screwed together on site. The delivery includes an ergonomic bench, an ergonomic backrest and a floor grid.
Infrared radiators and heat distribution
An infrared sauna works differently from a Finnish sauna. Instead of heating the air first, it emits infrared radiation that warms the surface of the body directly. The air temperature in the cabin therefore stays considerably lower, the cabin is ready for use sooner, and no heater stones or water are needed.
The heat output is divided between six sources:
- 2 × dimmable 400 W infrared radiator on the rear wall,
- 2 × 300 W heating panel on the side walls,
- 1 × 200 W heating panel at calf level,
- 1 × 200 W heating panel in the floor.
Each person has their own infrared radiator behind them. Side, calf and floor panels complete the heating across the full seated height.
Controls and equipment
Temperature is set between 30 and 70 °C and the operating time between 5 and 60 minutes. Once the set temperature is reached, the heating elements switch off and switch on again when the temperature falls by 2 °C. If the cabin temperature exceeds 80 °C, the control unit shuts down all functions.
Equipment includes a reading light, coloured light with a choice of colours and a colour-cycling mode, FM radio, playback via Bluetooth, USB and an external AUX input, and two loudspeakers.
Electrical connection and installation
Supply 230 V, 50 Hz, total output 1,800 W at 7.8 A. The installation site must be protected from splashing water, with an ambient temperature of at least 20 °C and air humidity not exceeding 95%. The cabin stands on a level surface at least 5 cm from the wall.
Who the model is for
The model is intended for two people, or for one person who wants more room in the cabin. For one person in a smaller footprint, the Solis Pane Solo is 100 cm wide.
| Capacity | |
|---|---|
| Outer dimensions | 130×104×200 cm |
| Material | Abachi, Aspen wood |
| Type of sauna | Infrared sauna |
| Heaters | infrared radiators: 2 × 400 W (rear wall, dimmable); heating panels: 2 × 300 W sides, 1 × 200 W calves, 1 × 200 W floor |
| Power consumption | 1,800 W (7.8 A) |
| Power supply | 230 V, 50 Hz |
| Temperature range | 30–70 °C |
| Equipment | timer: 5–60 min; reading and coloured light, FM radio, Bluetooth, USB, AUX, 2 loudspeakers |
Running costs and
return on investment calculator
on investment
payback period
Who is Solis Pane Duo for?
Couples and two-person households
The 121 cm bench lets two people sit side by side.
One person wanting more room
At 130 cm wide it offers more space than the single model.
Plugs into a socket
The cabin connects to a 230 V socket and is rated at 1,800 W.
Quick evening sessions
Temperature from 30 to 70 °C and a 5–60 minute timer.
Technology and materials
How is the implementation proceeding?
Modular system
Precise configuration
Configuration takes place within defined variants that maintain stability, safety and material integrity.
The result is a solution that naturally fits into the space and supports long-term regeneration.










Reviews
There are no reviews yet.