Arctic Chrome

AISI 304 is an austenitic stainless steel containing roughly 18% chromium and 8% nickel, and it is among the most widely used stainless grades in manufacturing. The chromium forms a thin passive oxide layer on the surface that protects the material from oxidation and re-forms by itself after scratching. In wellness construction, AISI 304 is […]

Gelcoat is a protective and aesthetic surface layer applied to composite materials, particularly the fibreglass structures of hot tubs, pools and cooling tubs. It is a special polymer resin applied as the first layer in the mould, before the fibreglass reinforcement is applied. Once cured, it forms a smooth, non-porous and durable surface that is […]

Filter Balls, also known as Polysphere, are a modern filter medium made from high-density synthetic polymer fibres with a fine microstructure. They are used as a replacement for traditional silica sand in the filtration systems of hot tubs, pools and cooling tubs. They work on the principle of mechanical filtration, where the fibrous structure traps […]

Ofuro is a traditional Japanese bathing barrel or deep tub intended for calm immersion of the body in hot water, primarily for relaxation and recovery rather than washing. Unlike a standard bathtub, ofuro is deeper and shorter, allowing an upright seated position with the body fully immersed up to the shoulders. It is traditionally made […]

Chromotherapy is a technology that uses coloured LED lighting to influence the user’s psychological and physiological state during wellness procedures. In hot tubs, saunas, and cooling tubs, LED lights are integrated directly into the structure, most often below the waterline or within the cabin interior. Modern systems use energy-efficient RGB LED diodes that allow colour, […]

Hydrotherapy is a therapeutic method that uses water, its temperature, pressure, and movement to support the body’s recovery and release muscle tension. In hot tubs and wellness systems, it is delivered through a combination of heated water and massage jets that create targeted streams of water and air. These streams stimulate the muscles, improve blood […]

Acrylic is a synthetic polymer known as PMMA (polymethyl methacrylate), used as the primary surface material for the shell of hot tubs, tubs and wellness equipment. It is a solid, non-porous and UV-stable plastic that can be thermoformed into ergonomic shapes. In hot tub construction, it forms the outer layer that is in direct contact […]

Fibreglass reinforcement, also referred to as a fiberglass backing layer, is a structural layer of glass fibres and resin applied to the back of the acrylic shell of a hot tub or tub. Its main function is to reinforce the acrylic surface and ensure the mechanical strength of the entire structure. Glass fibres have high […]

UV-C sterilisation is a physical water disinfection method using ultraviolet radiation at a wavelength of approximately 254 nm. Water in a sauna, hot tub, or cooling tub flows through a sealed chamber containing a quartz sleeve housing a UV-C lamp. The radiation disrupts the DNA and RNA of microorganisms, preventing further reproduction. It is neither […]

Marine Grade Vinyl is a specially engineered synthetic material designed for extremely humid, sun-exposed and mechanically demanding environments, originally developed for the marine industry. It is a multi-layer, PVC-based material with protective additives against UV radiation, mould and water. In the wellness sector, it is used mainly for hot tub covers, thermal insulation covers, headrests […]

An ozone generator produces ozone (O₃) from ambient air using corona discharge or UV radiation technology. In hot tubs, cooling tubs, and small pools, ozone injected through a Venturi injector dissolves in the water, where it acts as a strong oxidising agent. Ozone reacts with bacteria, viruses, moulds, and organic contaminants, breaking them down chemically. […]

A cooling tub is a wellness device designed for brief immersion of the body in cold water, typically in the range of 3 to 15 °C. It is used mainly after a sauna session or physical exertion to cool the body rapidly and stimulate physiological responses. The principle relies on sudden cooling of the skin, […]

A 2-in-1 sauna + hot tub is an integrated wellness system that combines a sauna and a hot tub, or hot bathing tub, into a single structural or functional unit. Both units can be physically joined in one enclosure or positioned side by side as part of a single design solution. The purpose is to […]

Aristech Acrylics® is a US manufacturer of premium acrylic sheets used to produce shells for hot tubs, pools and wellness equipment. The material is continuously cast acrylic (PMMA – polymethyl methacrylate), characterised by high density, non-porosity and a homogeneous structure. It forms the interior surface of the hot tub, which is in direct contact with […]

ThermoWood is timber modified through a controlled thermal process at temperatures of approximately 160–215 °C in an oxygen-free environment, without the use of chemicals. The treatment reduces moisture content and breaks down part of the hemicelluloses, which substantially improves the material’s dimensional stability. The wood becomes more resistant to rot, mould and biological pests. It […]

AISI 316 is a high-grade austenitic stainless steel containing chromium, nickel and molybdenum, designed for use in aggressive and humid environments. The presence of molybdenum significantly increases corrosion resistance, particularly on contact with chemically treated water, chlorine or a saline environment. In the wellness sector, it is used to manufacture jets, structural elements, fasteners and […]

Incoloy® 800 and Incoloy® 825 are high-performance nickel-iron-chromium alloys engineered for extreme temperature and corrosive conditions. They are used as the material for heating elements in electric heaters for hot tubs, bathing water, and wellness systems. Their high nickel and chromium content gives them exceptional resistance to oxidation, corrosion, and chemical damage caused by disinfectants […]

The WiFi module & smart control is a communication hardware accessory that connects a hot tub, sauna, or cooling tub’s control pack to a home WiFi network and a mobile app. The module acts as a bridge between the device’s local electronics and a cloud-based or local control interface. The user can remotely monitor system […]

A chiller is a device designed for active water cooling using a compressor-based refrigeration circuit, similar in principle to a heat pump or air conditioning unit. In a wellness context, it is used for cooling tubs, cold plunge pools or combined hot and cold systems. Water circulates through a heat exchanger (often titanium, for its […]

Balboa Water Group® is an established American manufacturer of electronic control systems and components for hot tubs, spa systems, and wellness equipment. Their products include control packs, control panels, heaters, sensors, and communication modules that manage all key hot tub functions. The control pack functions as the system’s “brain” – it manages water temperature, filtration, […]

A thermal cover is an insulating hot tub cover that closes over the water surface when the hot tub is not in use. Its main function is to limit heat loss and slow water evaporation, reducing the energy needed to maintain the set temperature. The cover typically consists of a rigid closed-cell foam core wrapped […]

A heat pump is a hot tub water heating device that, instead of converting electrical energy directly into heat, transfers heat from the surrounding air into the water through a refrigeration circuit. The principle is the reverse of a chiller used for cooling. The same technology extracts heat from outdoor air even at low temperatures. […]

Siberian larch is a coniferous species with high density and natural resin content, used outdoors primarily for decking boards under pergolas and around saunas and hot tubs. Slow growth in a cold climate produces a dense, finely structured wood grain with higher mechanical strength than common Central European conifers. High resin content acts as a […]

RGB lighting is a colour LED lighting technology based on combining three primary colour diodes, red, green and blue, which mix to produce a wide spectrum of colours and shades. In hot tubs, saunas and cooling tubs, RGB diodes are integrated into the structure, most often below the waterline, into benches, or into the cabin […]

PVC flooring is a polyvinyl chloride wearing layer intended for areas in permanent contact with water and high humidity, such as shower zones, the surrounds of hot tubs, or the technical areas of wellness cabins. The material is supplied as homogeneous or heterogeneous sheets or tiles, which are welded into a continuous, watertight surface without […]

The shower zone is a functional part of the wellness area intended for rinsing the body before and after sauna use or bathing in a hot tub. For hygiene and operational reasons, it is separated from the sauna and hot tub by its own floor covering and drainage, capable of withstanding permanent contact with water. […]

EPDM membrane is a synthetic waterproofing membrane made from ethylene-propylene-diene rubber, which is used to protect structures against water and moisture penetration. In the wellness sector, it is mainly used for insulating cooling tubs, ponds, pergola roof structures or as a protective layer beneath technical components. The material is extremely resistant to UV radiation, temperature […]